Conducting Plain Bob Doubles: See The Complete Picture

There are a number of ways to learn the basics of conducting and ways to apply them. Rather than piecing it all together a little at a time, I offer a way to see the whole picture at once. Every part from the basic coursing orders to choosing practice touches and composing your own in your head on the spot.

Coursing Order

The grounding pattern to everything is of course the coursing order for the plain course. It is cyclical...

... 5324532453245 ...

How you view the order usually depends on the bell you are ringing or the bell that is unaffected in the touch (if one is). Accept viewing the order from your bell regardless of whom is affected by calls then omit your bell to have a simple working order of the remaining three.

Order Per Bell

From the	Complete Order	Working Order
2	2453	453
3	3245	245
4	4532	532
5	5324	324

Based on this coursing order and a few basic premises you have complete control over everything.

Effects of Calls

In Plain Bob Doubles there are available:

• Two calls
  • Bob
  • Single
• Four calling positions
  • 4 :: Fourths
  • B :: Before
  • I :: In
  • H :: Home

With the two calls there are only four changes you can make to the three-bell coursing order.

Memorise this table and you will have a masterful control available from your head:

Transpositions

Name	Effect	Description	Bob	Single
Pop	abc -> bca	Pop the first one from the front.	H	B
Push	abc -> cab	Push the last one onto the front.	4	I
Front	abc -> bac	Swap the front pair.	I	4
Back	abc -> acb	Swap the back pair.	B	H

In its simplest form, this is what you need to remember. Use whatever names suit your memory if these aren't easy for you to remember. I like to remember the effect of the bobs and then reverse it for a single.

Call Effects

Effect	Calls	Memory Tip
Pop	H / sB	"Pop" sounds like "Bob". The 1st place you learn to call one is Home (2nds for a single)
Push	4 / sI	Making the bob Pushes away from 5ths. Making 3rds Pushes away from 2nds.
Front	I / s4	You run in to the Front following a bob In (reverse for single)
Back	B / sH	You run out to the back following a before (reverse for single)

From that pattern you can compose any practice touch you like on-the-fly.

Premises

Unaffected Bell

Any call you make in plain bob doubles affects three of the four bells. The other one continues as if no call was made.

If you are the unaffected bell because you call a single Before (sB) or a bob at Home (H), every bell in the order moves one place to the left. Otherwise the one that is unaffected is the only one to move one place to the right.

As an example, from the random order of 432, if you wish to make continuous calls that do not affect the 3rd, you must move it through the order one call at a time, leaving the other bells where they are: 432 -> 423 -> 342 -> 432 -> ... ; this proves immediately that if you ring any length with one completely unaffected bell, the touch will consist of only three rotating coursing orders.

Special Coursing Orders

A plain course of bob doubles has 40 changes (4 leads of 10 changes each, one lead for each place-bell). When you have a particular coursing order - if no call is made - those 40 changes will be repeated forever.

5324

When the coursing order is 5324 one of those changes is rounds, at backstroke, at the lead end (of course). This means that, no matter where you enter the plain course, within 40 changes you will reach rounds and the end of your touch.

5423

The order 5423 (or 4235, remember it's cyclical) is the reverse of the plain coursing order. You will get the same changes, but they will happen on the opposite stroke to normal and in opposite order, backwards if you prefer. One of the 40 changes in this order must of course be rounds; but it will happen at handstroke not backstroke as usual.

Composing Touches

Based on these premises, when choosing a touch of plain bob doubles you can quickly generate the touch in your head knowing exactly where you will make the calls based on which call at which position has which effect on the order.

Choice such as wanting to call a bell unaffected - while ringing a different bell - are elementary to implement.

This is best demonstrated by example. Let's assume you are going to ring the 3rd, but you have a learner on the 2nd that you wish not to be affected throughout a touch.

• You are ringing the 3rd: the coursing order starts at (and omits) 3: 3245
• You are calling the 2 unaffected: all calls will move the 2 one place to the right.

Immediately you know all the coursing orders in the touch:

245 -> 425 -> 452 -> 245

You can then choose for each change in the coursing order when you wish to make a call that will make the change you need.

2nd Unaffected from the 3rd

Change to C.O.	Name	Calls Available
245 -> 425	Front	I / s4
425 -> 452	Back	B / sH
452 -> 245	Push	4 / sI

What this means in practice is that:

• With bob calls only there is only one touch
  • Known as a standard 120
  • Bob @ In, Bob @ Before & Bob @ 4
  • Usually described as "In, Out & Make It" as viewed from the 3rd
  • Can be shortened to: IB4.

However it gets much more interesting when you consider singles, which you can swap-in in place of bobs as and when you please. As such, any of the following call sequences - called from the 3rd - will still produce a touch that comes round as normal and will leave the 2nd unaffected at all calls:

2nd Unaffected from 3rd

Touch	Changes	Trueness
IB4	120	True
IBsI	80	True
IsH4	80	True
IsHsI	80	True
s4B4	120	False
s4BsI	80	True
s4sH4	120	False
s4sHsI	120	True

Note: In this case, when you call a s4 to start and a 4 to end, you get a duplication of certain parts of a coursing order that makes the touch technically false, but not any less valid for practising with.

This same process can be repeated for any unaffected bell as called from any working bell.

Advanced Touches

If you do not need to have an unaffected bell you can have all kinds of fun.

The Shortest

Consider for example what happens if you ring the 5th and call a 4 followed by a H, or ring the 2nd and call sIsB.

In both cases you first push the coursing order and then pop it, putting the order back to the plain course. Given that in the first case the 5th makes the bob and then long 5ths, or in the second case the 2nd makes 3rds and then makes 2nds, both produce valid touches only two leads long.

The second of those examples is particularly useful for teaching making 3rds from the back as everyone else is unaffected or plain-hunting.

Ugly Fun

Fancy playing around, making unconventional music and irritating stalwarts? Come round at handstroke; whenever you like!

Just make whatever calls you need to reverse the coursing order and wait (but don't miss it). Listen for the first few changes you are familiar with coming at you backwards - note that if you finish on the Single @ Home, you will be making the call and calling "That's All" only half a stroke apart.

• From 5th
  • 324 -> 432
    • Push
    • 4 / sI
  • 432 -> 423
    • Back
    • B / sH